This 1 hour course will cover the basics of resistance and laser welding and a brief overview of the equipment most commonly used to achieve the desired application dependent results.

Our Ultrasonic Welding Class is a 45 minute session designed for those new to Ultrasonics or those would like to learn more about it.

We cover theory and terminology of the Ultrasonic process and where, when, and why to use Ultrasonics. We will go over many real world examples of this technology for both Plastic welding and Metal Welding.

This 45 minute course covers all of the basics on common technologies for welding and staking plastic assemblies.

We will cover when to use each technology, what to look out for when designing parts, and share a few application examples.

This 30 minute course is an introduction to orbital and radial riveting technologies. 

We will cover each technology, the key differences between the two, and when to use each type.  

In this 1.5 hour session we will discuss pressing, punching, and joining Air/Oil and Servo presses. 

We will cover the best time and place to use them, the difference between Air/Oil and Servo units, and how they work in general.

Everything Leaks – The question is what is the acceptable level of leak for your product.

This training session will cover some of the fundamental techniques used for leaking testing in our world today. 

This 1.5 hour course is designed for people who are new to leak testing.  We will cover different techniques, where to apply them and why.  We will bring in many real world examples to help explain this sometimes complicated topic.

Topics we will cover:

• Pressure Decay vs Differential Pressure Decay vs Mass Flow
• Testing with Air vs Testing with Helium
• When each Technology should be used

An hour of live demos and opportunities to try the technologies discussed.

This 1.5 hour course is an overview of both traditional mechanical feeding technologies and robotic and vision based feeding systems. 

We will cover mechanical systems including vibratory bowl feeders, centrifugal bowl feeders, orienting and opposing conveyors, and complimentary systems. We will also cover robotic feeding systems including flexible conveyor and shaker table vision based feeding systems. 

Our event is almost at capacity. If you are interested in attending, please fill out the above form.